Equipment of the Laboratory for Rapid Prototyping and Reverse Engineering

3D PRINTER - Z310+

 
 

Producer: Z Corp, USA
Equipment purchased: 2006
Type of equipment: 3D PRINTER Z310+
Building space: 203 x 254 x 203 mm
Layer thickness: 0.089 ÷ 0.203 mm

  
 

Printing materials:
- ZCast501- ceramics baser material
- zp130 and zp250 – plaster based materials
- zp15e – material for flexible elastics parts based on starch
Infiltration materials:
- Z-Bond
- Z-Max
- Z-Snap
- Elastomer kit
- Wax

Bending materials:
- Zb 56
- Zb 58
- Zb 51






 

RECYCLING UNIT ZD5

 
 

Producer: Z Corp, USA
Equipment purchased: 2006
Type of equipment: recycling of used powder

  

 

THREE-DIMENSIONAL (3D) SCANNER - Micro Scribe MX System

 
 

Producer: Immersion, USA
Equipment purchased: 2007
Type of equipment: Micro Scribe MX System
Technology: Tactile three-dimensional (3D) scanner
Working area: 1,27 m
Accuracy: 0,1016 mm
Degrees of freedom: 5

 

 

THREE-DIMENSIONAL (3D) SCANNER - DAVID Laserscanner 3D

 
 

Producer: DAVID Vision Systems GmbH, Germany
Equipment purchased: 2010
Type of equipment: DAVID Laserscanner 3D
Technology: Optical three-dimensional (3D) scanner
Workspace (screen): A6, A5, A3 i A0
Accuracy: min. 0,2 mm

  

 

SOFTWARE

 
 
Z-Print 7.3
Z-Edit 7.2
  
 
Catia v5
ProEngineer Wildfire
  
 
MicroScribe
DAVID software
  

 

ADDITIONAL EQUIPMENT - Material Testing Machine ZWICK 30kN

 
 

Producer: Zwick&Roell, Germany
Equipment purchased: 2009
Type of equipment: Material Testing Machine Fmax 30kN
Max. force: 30 kN
Working area: 440x1780 mm
Speed of testing: 0,0005 ... 1000 mm/min
PC application: testXpert II V1.4
Measuring range: 60 N ... 30 kN
Type of test: Mechanical testing tension, compression and bending

  

 

ADDITIONAL EQUIPMENT – Portable Surface Roughness Tester Mitutoyo Surftest SJ-301

 
 

Producer: Mitutoyo, Japan
Equipment purchased: 2008
Type of equipment: Surftest SJ-301
Measuring Speed: 0,25 mm/s and 0,5 mm/s
Measurement: Induction method
Measuring range: 350 µm
Stylus tip: Diamond, 90º/5µmR (60º/2µmR: low force type)
Measurement Parameters: Ra, Ry, Rz, Rt, Rp, Rq, Rv, Sm, S, Pc, R3z, mr, Rpk, Rvk, δc, Rk, Mr 1, Mr 2, Lo, Ppi, R, AR, Rx, A1, A2, BAC 1, BAC 2, ADC
Measuring length: 0,08 mm, 0,25 mm, 0,8 mm, 2,5 mm, 8 mm or by choice

  

 

ADDITIONAL EQUIPMENT - Metal Hardness Tester Equotip Piccolo 2

 
 

Producer: Proseq, Switzerland
Equipment purchased: 2010
Type of equipment: Equotip Piccolo 2
Method of testing:Leeb rebound
Impact energy: 11 Nmm
Testing range: 150 - 950 HL
Wide measurement range on common hardness scales: HV, HB, HRC, HRB, HS, Rm
Resolution: 1 HL; 1 HV; 1 HB; 0.1 HRC; 0.1 HRB; 0.1 HS; 1 MPa (1 N/mm²)
PC application: Piccolink Software