Published Papers:

 
1. S. Jakupović, E. Cerjaković, A. Topčić, M. Ajanović, A. Konjhodžić-Prcić: „Analysis of the Abfraction Lesions Formation Machanism by the Finite Element Method“, Journal: Acta Informatica Medica, Vol. 22, Issue: 4, format A4, page 241÷245 /5  pages/, ISSN 0353-8109 (Print), ISSN 1986-5988 (Online), Sarajevo 2014 (Abstract>>) 
2. A. Topčić, E. Cerjaković, S. Lovrić.: “Analysis of dimensional deviation of parts based on ceramic produced by Three Dimensional Printing process”, International Scientific Conference ETIKUM 2014,  Proceedings, format A4, page 001÷004 /4  pages/, Faculty of Technical Science Novi sad, Novi Sad, Serbia, Jun 19÷20, 2014, ISBN: 978-86-7892-616-7, COBISS.SR-ID 286974727, paper rewarded by publishing in Journal of Production Engineering, Vol.17, No.1, University of Novi sad, Faculty of Technical Science Novi Sad, Journal, format A4, page 63÷66 /4  pages/, Novi Sad, Serbia, July 2014, UDK621, ISSN 1821-4932; (Abstract>>) 
3. S. Lovrić, Dž. Tufekčić, A. Mustafić, A. Topčić: „Comparative analysis of contact versus contactless methods of three-dimensional digitization of objects“, The 1st International Virtual Conference on Advanced Scientific Results (SCIECONF-2013), Publishing Institution of the University of Zilina, Proceedings, format A4, page 394÷397 /4  pages/ Slovakia, Zilina, June 10. - 14. 2013, ISBN: 978-80-554-0726-5, ISSN: 1339-3561 (Abstract>>) 
4. A. Topčić, E. Cerjaković, S. Lovrić: "Comparative analysis of RE/RP versus Conventional Approaches of Tool Designing in Sand Casting", 11th International Scientific Conference MMA2012, University of Novi Sad, Faculty of Technical Science Novi Sad, Proceedings, format B5, page 493÷497 /4  pages/, Novi Sad, Serbia, September 2012., ISBN 978-86-7892-429-3; (Abstract>>) 
5. S. Lovrić, Dž. Tufekčić, A. Topčić, M. Beganović: "The application of Rapid Prototyping and Reversible Engineering in sand casting ", 38. JUPITER conference with international  participation, University of Beograd, Faculty of Mechanical Engineering Beograd, Proceedings, format A4, page 204÷210 /6  pages/, Beograd, Serbia, May 2012, ISBN 978-86-7083-757-7; (Abstract>>) 
6. N. Zaimović-Uzunović, S. Lemeš, D. Ćurić, A. Topčić : „Rapid Prototyping for sling design optimization“, Journal „Advances in Production Engineering & Management“, Vol.5, Num.4, format A4, page 271÷281 /10 pages/, University of Maribor, Faculty of Mechanical Engineering in Maribor, Institute for Production Engineering, Maribor, Slovenia, December, 2011, ISSN 1854-6250 (Print); ISSN 1855-6531 (On-line) (Abstract>>) 
7. A.Fajić, A. Topčić, Dž. Tufekčić, E. Cerjaković: “Direct Hard Tooling Produced RP Methods“, 15th International Research/Expert Conference: ”Trends in the Development of Machinery and Associated Technology”, TMT 2011, Prague, Czech Republic, 12-18 September 2011 (Abstract>>) 
8.
E. Cerjaković, A. Topčić, S. Lovrić, S. Ahmetbegović: „Application of Rapid Prototyping Technology in 3D visualization of relief surfaces“, 2nd International conference VALLIS AUREA 2009, DAAAM International Vienna, Academy in Požega, Požega, Croatia, September 2010 (Abstract>>) 
9.
A. Fajić, Dž. Tufekčić, A. Topčić, E. Mujić: "Rapid Prototyping data formats", 7th International Scientific Conference on Production Engineering DEVELOPMENT AND MODERNISATION OF PRODUCTION - RIM 2009, Technical Faculty of Bihać, Cairo University of Engineering and B&H Robotic association, Proceedings, format B5, pages 1÷6 /6 pages/, Cairo, Egypt, October 2009, ISBN 978-9958-624-29-2, COBISS.BH-ID 17540614 (Abstract>>)
10.
A. Fajić, Dž. Tufekčić, A. Topčić: "Rapid Prototyping processes based on MIT technology of 3D printing", 12th International research/expert conference on Mechanical Engineering 2008 – Strojne Inžinierstvo 2008, Slovak University of Technology in Bratislava, Faculty of Mechanical Engineering Bratislava, Proceedings, format B5, pages VI-41÷VI-43 /6 pages/, Bratislava, Slovakia, November 2008, ISBN 978-80-227-2987-1. (Abstract>>)
11.
A. Fajić, Dž. Tufekčić, A. Topčić, J. Bejić, E. Cerjaković: " Effects of processing parameters on tensile strength of 3D printed parts”, 5th International Symposium, “Konstruisanje, oblikovanje i dizajn, KOD 2008”, Proceedings, format A4, pages 355÷358 /4 pages/, April 2008, Novi Sad, Serbia, CIP 658.512.2(082), COBISS.SR-ID 230213639, ISBN 978-86-7892-104-9 (Abstract>>)
12.
A. Topčić, Dž. Tufekčić, A. Fajić, E. Cerjaković: "Implementation of Three Dimensional – 3DP printing process in casting", 5th International Symposium, “Konstruisanje, oblikovanje i dizajn, KOD 2008”, Proceedings, format A4, pages 393÷398 /6 pages/, April 2008, Novi Sad, Serbia, CIP 658.512.2(082), COBISS.SR-ID 230213639, ISBN 978-86-7892-104-9.(Abstract>>)
13.
A. Topčić, A. Rifatbegović, E. Cerjaković: "Implementation of parts produced by three-dimensional printing process in medicine", Monographs of Faculty of technical Science in Novi Sad ”MACHINE DESIGN”, format A4, pages 193÷198 /6 pages/, May 2008, Novi Sad, Serbia, CIP 62-11:658.512.2(082), COBISS.SR-ID 230893319, ISBN 978-86-7892-105-6 (Abstract>>)
14.
A. Topčić, E. Cerjaković, Z. Babović, E. Trakić: "Implementation of systems for Reverse Engineering in product development", 1st international conference VALLIS AUREA 2008, Proceedings, format B5, pages 969÷973 /5 pages/, DAAAM International Vienna, Academy in Požega, September 2008, Požega, Croatia, ISBN 978-953-98762-7-0, ISBN 978-3-901509-60-5. (Abstract>>)
15. A. Fajić, T. Dragi, T. Galeta, A. Topčić: " Analysis of dimensional accuracy of prototypes produced by 3DP processes ", 5. Science-expert meeting with international participation "QUALITY 2007", Proceedings, format B4, pages 263÷268 /6 pages/, Jun 2007, Neum, Bosnia and Herzegovina, ISSN 1512-9268; (Abstract>>)
16. N.Zaimović-Uzunović, S. Lemeš, D. Ćurić, A. Topčić: "Rapid Prototyping for sling design optimization", The 1st DAAAM International Specialized Conference on Additive Technologies, Proceedings, format A4, pages 5÷19 /6 pages /, April 2007,Celje, Slovenia, ISBN 3-901509-61-5, COBISS.SI-ID 58571265, CIP 681.5(082); (Abstract>>)
17.
E. Cerjaković, R. Šelo, Dž. Tufekčić, A. Topčić: "Production of Rapid Prototyping models in medicine", 4th International Conference on Advanced Technologies for Developing Countries, ATDC2005, Proceedings, format A4, pages 225÷230 /6 pages /, September 2005, Slavonski Brod, Croatia, ISBN 949-614-68-6; (Abstract>>)
18.
A. Topčić, Dž. Tufekčić, M. Jurković, N. Zaimović-Uzunović: "Influence of processes parameters on axial breaking force of parts produced by Selective Laser Sintering process", International scientific journal "METALLURGY", Croatian metallurgy society, Journal, format A4, pages 133÷136 /4 pages /, 2005, Zagreb, Croatia, ISSN 0543-5846, METABK 44(2) 133-134, UDC-UDK 669.018.95:544.5:620.172=111 (Abstract>>)
19.
A. Topčić, Dž. Tufekčić, R. Šelo: "Influence of triangle approximation parameters on quality of parts produced by Selective Laser Sintering process", International Science-Experts Meeting: "Research and Development of Mechanical Elements and Systems ", IRMES 2004, Yugoslav society for mechanical elements and constructions JuDEKO and Faculty of Mechanical Engineering Kragujevc, Proceedings, format B4, pages 167÷172 /6 pages/2004, Kragujevac, Serbia and Montenegro, ISBN 86-80581-66-6 (Abstract>>)
20.
A. Topčić, Dž. Tufekčić, R. Šelo: "Influence of process parameters on roughness and texture of flat fill in surfaces of parts produced by Selective Laser Sintering process" , Scientific Conference with International Participation, Manufacturing and management in 21st century, University "Ss. Ciril & Metodius" Faculty of Mechanical Engineering Skopje, Proceedings, format A4, pages 96÷101 /6 pages/, September 2004, Ohrid, Republic Macedonia (Abstract>>)
21.
A. Topčić, Dž. Tufekčić, R. Šelo: "Influence of process parameters on roughness and texture of lateral flat surfaces of parts produced by Selective Laser Sintering process", 3rd International Conference on Advanced Technologies for Developing Countries, ATDC 2004, DAAAM International Vienna, Faculty of Electrical Engineering, Mechanical Engineering and Naval Architecture, Proceedings, format A4, pages 193÷198 /6 pages /, June 2004, Split, Croatia, CIP 621 (063) (082) 007 (063) (082) 007 :001.892] (063) (082), ISBN 953-6114-68-2 (Abstract>>)
22.
A. Topčić, Dž. Tufekčić, R. Šelo: "Proces of Selective Laser Sintering”, International Science-Experts Meeting ", Research and Development of Mechanical Elements and Systems", IRMES 2002, Proceedings, format B5, pages 319÷324 /6 pages /, September 2002, Jahorina, Bosnia and Herzegovina, (Abstract>>)
23.
A. Topčić, Dž. Tufekčić, R. Šelo: "Rapid Prototyping systems - Features and possibility for use", 1st International Conference on Advanced Technologies for Developing Countries, ATDC2002, Proceedings, format A4, pages 71÷78 /8 pages /, September 2002, Slavonski Brod, Croatia, UDK 621(063)=111=163.42, ISBN 3-901509-32-1, ISBN 953-7611-64-X (Abstract >>)
24.
A. Topčić, Dž. Tufekčić, R. Šelo: " CAD systems and different ways of data representation for Rapid Prototyping machines", 1st International Conference on Advanced Technologies for Developing Countries, ATDC2002, Proceedings, format A4, pages 79÷86 /8 pages /, September 2002, Slavonski Brod, Croatia, UDK 621(063)=111=163.42, ISBN 3-901509-32-1, ISBN 953-7611-64-X; (Abstract>>) 

Book

 
1. Alan Topčić, Edin Cerjaković: "Prototyping", Univerzitet u Tuzli, Tuzla, ISBN 978-9958-0374-0-5 (PDF>>)
2. Alan Topčić, Džemo Tufekčić, Edin Cerjaković: "Product Development ", Univerzitet u Tuzli, Tuzla, ISBN 978-9958-31-074-4 (PDF >>)

PhD thesis:

 
Finished:

1.

Adis Fajić: „Optimization of the production chain of the direct tools production by three-dimensional printing processes“ (Abstract>>) 
In process:

 

Master thesis

 

Finished:

1.
Candidate: Adis Fajić, mechanical graduate engineer, topic: ”Analysis of the influence of Three Dimensional Printing process parameters on characteristics of produced prototypes”, (in Bosnian: “Analiza utjecaja procesnih parametara tehnologije 3D printanja na svojstva prototipa”), mentor : Dragi Tiro, PhD, Assistant Professor, April 2007, (Abstract>>)
2.
Candidate: Alan Topčić, mechanical graduate engineer, topic: “Influence of process parameters on quality of products produced by Selective Laser Sintering process”, (in Bosnian: ”Utjecaj procesnih parametara na kvalitet proizvoda pri procesu selektivnog laserskog sinterovanja”), mentor: Džemo Tufekčić, PhD, Full Professor, October 2003, (Abstract>>)

In process:

1.
Candidate: Slađan Lovrić, mechanical graduate engineer, topic: “Analysis of bottlenecks in the integral development of products” (in Bosnian: ”Analiza uskih grla u integralnom razvoju proizvoda”, mentor: Alan Topčić, PhD, Assistant Professor, (Abstract>>)

Diploma thesis

 
Finished:

1. Candidate: Armin Nurkić , topic: „Implementation of Rapid Prototyping/Tooling systems in casting of plastics parts“, mentor: Alan Topčić, , Assistant Professor, 2009 (Abstract>>)
2.
Candidate: Enis Osmanović, topic: “Analiza dimenzionalne tačnosti dijelova proizvedenih procesom trodimenzionalnog printanja- 3DP”, mentor: Alan Topčić, PhD, Assistant Professor, February 2009, (Abstract>>)
3.
Candidate: Nermin Ćatić, topic: „Implementacija sistema za Reverse engineering u proizvodnji mašinskih dijelova“, mentor: Džemo Tufekcic, PhD, Full Professor, January 2008, (Abstract>>)
4. Candidate: Mirza Krainović, topic: „Analiza mogućnosti implementacije Rapid Prototyping sistema“, mentor: Džemo Tufekcic, PhD, Full Professor, December 2007, (Abstract>>)
In process:

1. Candidate: Salim Hasić, „Analiza utjecaja procesnih parametara na mehaničke karakteristike keramičkih dijelova proizvedenih procesom trodimenzionalnog printanja”, mentor: Alan Topčić, PhD, Assistant Professor, (Abstract>>)
2.
Candidate: Adnan Huskanović „Analiza utjecaja procesnih parametara na dimenzionalnu tačnost keramičkih dijelova proizvedenih procesom trodimenzionalnog printanja ”, mentor: Alan Topčić, PhD, Assistant Professor, (Abstract>>)
3. Candidate: Šenaj Imširović: „„Determination of influence of process parameters on the dimensional accuracy of ceramic parts produced by the process of three-dimensional printing process" ”, mentor: Alan Topči, Associate professor, (Abstract>>)

Other

 

Vehid Jahić: "Bosanska pamet za evropsko tržište", Daily newspaper “OSLOBOĐENJE”, May 17,2009 (Link >>)